Set ups range from checking over what comes from the factory to full

"Pro Level Sets Ups"

To play well the basics are,

* Are the frets level so there are no high or low frets that might cause buzzing or poor notes.

* How is the action or string height. That is measured at both the nut and the saddle (bridge).

* Are any of the fret's sprouting, sticking out beyond the edge of the fret board.

In New Mexico this is a really common problem on all fretted instruments.The wood in necks and fret boards are "Hygroscopic" they absorb and release moisture. As wood acclimates to our very dry climate it shrinks dimensionally .

Just think of the sponge in your kitchen, when it dries out it shrinks up, add water and it puffs back up again.

So while the wood is hygroscopic the metal in the frets is not. So when the fret board shrinks the frets stick out and need to be filed down to be smooth again.

Basic set ups include what is referred to as "fret level and dress". Which is what it sounds like, the fret are leveled and dressed to be relatively smooth. Action is also usually checked and adjusted. Unlike electric instruments nuts and saddles have to be carefully filed down to the desired height.

The "Pro Level Set Up" is what it sounds like, the ultimate set up. I don't know anyone who offers this level of set up that includes a mirror polishing of the frets not just smoothing them. It leaves them like glass, smooth and round and a dream to play. String height is adjusted to the players preference but normally 2.5mm at the 12 fret and .010 above the 1st fret at the nut.

How do I choose what level set up?

Is it dependent on the value of the instrument ? NO !

Even an "entry level" instrument will feel great with a great set up.

It takes 2-3 hours to do a Pro Level Set Up, so it's not cheap.

New instruments purchased through Renaissance at retail prices will include the basic set up above what comes from the factory. That usually includes an upgraded set of strings.

Keep in mind the fret sprout will happen and I recommend that the instrument be brought back when you notice it.

A completed "Pro Level Set Up" you can see the mirror polished fret work. The Aquila "Sugar" strings are very clear and the frets shine right through them.

OH6.jpg
OH8.jpg

Frets as they come in can have some roughness or gauging from being set up at the factories or distributors. This is "industry standard" and not uncommon, but it leaves plenty of room for improvement. They can be played just fine like this and most would never notice.

OH9.jpg

The fret board has to be taped off for the polishing a slow and PITA (pain in the ass) process.

OH5.jpg

After about and hour and half to two hours, they are "mirror polished"

OH4.jpg
OH1.jpg